Energy, supply & hydro

Hydropower

For decades we have been known as a most competent partner in the field of hydropower plant construction. The pre-manufactured units are shipped to the respective building sites and installed by our highly qualified installation personnell - sometimes under the most difficult conditions. In some cases the installation works can only be carried out by using cableways, inclined elevators or helicopters.

Calculation, construction and production of complex branching pieces, distribution pipelines, intake screens, various sealing devices like emergency stop gates, bottom outlets for reservoirs, reservoir gates, etc. is being handled at the location in Wels. 

Pressure piping:

  • Pressure piping exposed & grounded
  • Tunnel linings
  • Manifolds
  • Bifurcation parts
  • Expansion joints
  • Manholes
  • Bearings
  • Pipe bridges
  • Dismantling pieces
  • Surge tank linings

Hydraulic steelwork:

  • Intake and outlet gates
  • Stop locks
  • Bulkhead gates and trash rakes
  • Flap gates
  • Bottom outlet gates
  • Radial gates
  • Lock gates
  • Intake gates
  • Navigation locks
  • Miter gates

Turbine installation / Fittings:

  • Hydraulic aggregates
  • Control units
  • Distributor stations
  • Cooling cycles
  • Piping works
  • Unscrewing and flame spraying of impeller coating with installed turbine
  • Spherical valves
  • Feed- and butterfly valves
  • Baffles of all kinds
  • Survey works
  • Maintenance- and repair works for turbines and fittings of all kinds 

Contact: Stephan Ebner
              Phone +43 7242 406-379
              Mobile +43 664 615 8538
              Email:
stephan.ebner@bilfinger.com

Heat generation

District heating
Besides the common pipe construction business consisting of engineering, supply, pre-fabrication and installation also EPC projects are part of our range of services. Here, we are providing our customers with our extensive know-how in project management, process design and commissioning of complex projects. 

  • Project- and building site management
  • Heat extraction/-stations
  • Integration of heat accumulator
  • High capacity heat pump plants
  • Pressure boosting station
  • Boilder house, biomass power plants
  • Thermal insulation, scaffolding, corrosion protection 
  • Plant automisation and process visualisation 
  • Commissioning and trial operation

Contact: Andreas Eferdinger
              Phone +43 7242 406-275
              Mobile +43 664 615 8446
              Email:
anderas.eferdinger@bilfinger.com

District Heating / Distribution

Acting as general contractor we supply complete plants and do not hesitate to accept any challenges.

Wir design, supply and install:

  • District heating networks for a wide range of pipeline systems, diameters, pressure stages and temperatures
  • Pipeline systems
  • Transformer stations
  • Culverts

Contact: Christian Hofer
              Phone +43 7242 406-311
              Mobile +43 664 615 8466
              Email: christian.hofer*Please remove text between *, this is a spam protection*@bilfinger.com

Heat Accumulators

Accumulators, tanks and other devices have to comply with the highest technological standards. Hence, they are quite often subjected to extensive static and chemical exposure. Engineering, calculation, pre-fabrication, installation and commissioning made by Bilfinger Industrial Services GmbH create optimal preconditions in this respect.

Heat accumulators, especially the patented 2 zone accumulator as well as the pressure less heat accumulation system 'Hedbäck' are supplied turn-key, including hydraulic network integration. 

Product range:

  • Pressure less heat accumulation system 'Hedbäck'
  • Pressure accumulator
  • 2-Zone accumulator
  • Hydraulic connection

Contact: Christian Hofer
              Phone +43 7242 406-311
              Mobile +43 664 615 8466
              Email: christian.hofer*Please remove text between *, this is a spam protection*@bilfinger.com

Thermal Power Plants

Bilfinger Industrial Services GmbH, being the specialist for processing of all common materials provides customised, turn-key solutions and a most profession project management.

  • Gas and steam combined plants
    Balance of Plant / Water - Steam - Cycle
    More than 20 successfully installed plants in operation in Europe
    Key customer: Siemens
  • Steam power plants (Biomass/coal/nuclear)
    Balance of Plant (BoP), pipeline systems
    More than 20 successfully installed plants in operation in Europe
    Key customers: Siemens und EVU

Sope of supply and services:

  • Project- and building site management
  • Basic- and detail engineering of the pipeline systems incl. supports
  • Supply of pipe- and support material (incl. fittings)
  • Pre-fabrication of the pipeline spools
  • Installation of the pipeline systems and equipment
  • Thermal insulation, scaffolding and corrosion protection
  • Commissioning (support)

Contact: Horst Schickmayr
              Phone +43 7242 406-326
              Mobile +43 664 615 8454
              Email:
horst.schickmayr@bilfinger.com

Gas Storage and Supply

Grounded pipelines are indispensable when it comes to transport of liquid and gaseous media. Gas storages, designed and installed by Bilfinger Industrial Services GmbH enable a most efficient use of media. Our experienced staff constists of a professional project management, technicans, welders and workers who all work up to the highest standards in regards to quality, timeliness, cost awareness and saftey.

We design, supply, install and commission:

  • Gas storages in all pipöe dimensions and pressure stages
  • Slide gate stations
  • Gas measuring stations
  • Volume-and pressure reducing stations
  • Compressor systems
  • Substations
  • GDRM equipment
  • Services (technical service, STOPP-works, pressure tests acc. to DVGW, etc)

Contact: Christian Hofer
              Phone +43 7242 406-311
              Mobile +43 664 615 8466
              Email: christian.hofer*Please remove text between *, this is a spam protection*@bilfinger.com

Tanks and other devices

All kinds for tanks, whether double-jacketed for storage of inflamable liquids or LPG-tanks for storage of liquefied gas are supplied installation and commissioning included. 

More than that, we are able to manufacture devices like heat exchangers or sieve bottom columns up to a length of approx. 35m and a diameter of 4,5m at our own manufacturing workshops.  

Services:

  • Storage tanks
  • Tanks for inflammable liquids
  • LPG-tanks
  • Double-jacketed tanks
  • Stacking towers
  • Pipe bundle heat exchangers
  • Sieve bottom- and packed columns
  • Process tanks

Contact: Christian Hofer
              Phone +43 7242 406-311
              Mobile +43 664 615 8466
              Email: christian.hofer*Please remove text between *, this is a spam protection*@bilfinger.com

Manufacturing Workshops

Bilfinger Industrial Services disposes of production competency, developed over decades. We are a flexible, reliable and efficient partner in the field of international plant construction. Metal processing works like milling, drilling and special production and done both in-house and in job-order production.

We support our customers with the production and revitalisation of complex steel constructions and plant components including mechanical processing. Further, we also produce pipes, components and tanks with a diameter of up to 8.000 mm and 100 tons weight/piece in our up-to-date manufacturing workshops. 

Contact: Christian Hofer
              Phone +43 7242 406-311
              Mobile +43 664 615 8466
              Email: christian.hofer*Please remove text between *, this is a spam protection*@bilfinger.com

 

Business Inquiry

Kontaktieren Sie uns
Unten
Absenden
Print